Service Charges

 

BY APPOINTMENT ONLY – just like it states. When you call, you will ask when your firearm will be done. If I am answering the phone, answering questions, talking to customers, answering the door, then I am not working on a gun, which means I am not making any money and not keeping with my schedule. So in between jobs or MY break time, I will return calls.  Emails are better for me. So my doors are locked and only open to invited guests/customers. No walk-ins. When I am working on your gun, you will ask why I did not get it done in time, and usually it is because customers continue to call. So please respect our time.

 

GENERAL GUNSMITHING – Will usually take up to 30 days depending on what you want done and whether parts are available.  If you want only factory (new) parts please specify. This will usually be more expensive.  Or you can let us try our new/used parts dealers (Gun Parts Corp, Jack First Dist., etc).  Most of these places will not tell us how long it will take to ship a part or how much it costs, so please bear with us as we have to bear with them.  Most parts are rare if you have a discontinued gun.  If this is your case and you must have it, I can have it made in most cases, but it will cost you a little more.

 

CUSTOMIZING – This usually takes from 30-120 days.  If you ask I can give you an approximate date of the completion.  Remember I also do and must make time for general gunsmithing.  When you order a custom gun, we will both go over every detail. Once it is complete, I would like you to pick it up and see me for further instructions on proper handling, care, ammo and warranty work.

 

WARRANTY – The state of West Virginia has a 1 year warranty on all items sold in this state.  If you have a problem, I can send the gun back to the factory at no charge to you or if you want it expedited you might have to pay for parts and/labor.  Used guns are only warranteed through Fortress Firearms Manufacturing, LLC.  (Except those with a limited lifetime warranty)

 

RUSH JOBS – Will only be done on Law Enforcement Duty Firearms.  All others, add 50% to labor.  I work on first come, first serve basis.  Most gunsmiths will not do rush jobs and this does not mean that I will repair it any faster, only that it will be worked on next and not while you wait or watch.

NOTE:  Law enforcement firearms only apply to your duty, carry or back-up weapon. Personal Law Enforcement firearms will be repaired as any other customer.

 

ALL GUNSMITHING IS GUARANTEED FOR 30 DAYS, not including parts.  If the firearm has been worked on by anyone other than myself or an FFM employee, then there is no guarantee.  NO EXCEPTIONS.

 

CUSTOM GUNS – Are guaranteed for workmanship for one year.  This will also include a tune-up every 90 days for 1 year.  Parts are not included.  A gun book will be issued for all new/rebarreled guns.  Please use it.  This will benefit you and me.  DO NOT TRY TO PUT THESE GUNS TO THE SAMSONITE TEST.

 

TESTING/SIGHTING IN/BORESIGHTING – Ammo and target is additional.  Customer may supply these if desired.  Only factory ammo, no reloads unless we duplicate your reloaded ammo.

 

TESTING FOR ACCURACY:

Rifle – Are tested from a bench rest at 100 yards.  Four groups of 5 rounds each are fired.  Different types of ammo are shot to see which one best suits your rifle.  No rifle will shoot more than 1-MOA when complete.  This only applies to match grade barrels and I cannot guarantee factory or used barrels.

Pistols/Revolvers – Are tested from a ransom rest at 25-50 yards.  Four groups of 5 rounds each are fired.  Different types of ammo are shot to see which one best suits your firearm.  (1 ½ in. groups at 25 yards).

Class III Firearms – Appointments for repair must be made in advance and all original ATF forms must be in your possession, customer must wait while firearm is repaired.

PRICES – This price list consists of labor prices only.  No parts are included.  All prices do not include any type of metal finish (Parkerizing, Bluing, Nickel, Chrome, Anodizing, Teflon, etc).  If needed, a touch up blue will be done but no guarantee as to a complete match will be made.

METAL FINISHING – All metal finishing will be priced upon request (P.O.R.).  Your wants, needs, cost and condition of your firearm will determine most of this.  If there is something specific no matter how big or small, talk to me personally with the firearm.

STAINLESS STEEL – Add 15% to total cost for any work for machining, filing, polishing or matching metal.  Stainless steel is a lot harder on tools.

Military and Law Enforcement personnel- If you are active, reserve or former US military or Law Enforcement and have some sort of proof (badge, ID, honorable discharge, etc.) then I will deduct 10% of all labor and parts that are not on any sale or special, this must be done prior to paying.

 

SHIPPING AND RECEIVING – All firearms must be shipped directly to a Federal Firearms Licensed Dealer if out of state. Rifles and Shotguns can be shipped by USPS and all handguns and ammunition must be shipped by UPS or Fed Ex (I have a UPS account). We do not make a living shipping items and in most cases you are charged to the nearest dollar on shipping. Do not ask us to send it cheaper or without a signature required or insurance.  This will be done no other way, unless you are local, in which case we will call you to make an appointment to pick it up. Tracking information will be sent to your email.

 

 

SERVICE CHARGES

SC01

Labor per man hour

$33.00

SC02

Labor per man/machine hour

$66.00

SC03

Minimum charge per job

$16.50

SC04

Written appraisal, cost estimates

$27.50

SC05

Check Headspace

$16.50

SC06

Test fire, ammo/target not included

$16.50

SC07

Assemble firearm brought in pieces (minimum)

$27.50

 

PROFESSIONAL CLEANING

(ALL FIREARMS COMPLETELY STRIPPED, EXCEPT THOSE PARTS THAT MUST BE REPLACED UPON DISASSEMBLY.  ALL WOOD EXTRA, THEN RE-OILED)

(ADD $15.00 FOR SC04 TO BE INCLUDED)

PC01

Auto Pistols (22/32/380/9mm)

$27.50

PC02

Auto Pistols (all others)

$33.00

PC03

All single action revolvers

$27.50

PC04

All double action revolvers (except Colt)

$33.00

PC05

All double action Colt revolvers

$38.50

PC06

Single barrel break open shotgun

$27.50

PC07

Double barrel shotgun/rifle

$33.00

PC08

Pump/Automatic shotgun

$38.50

PC09

Bolt action rifle (glass bedded add $15)

$27.50

PC10

All other rifles (glass bedded add $15)

$33.00

PC11

All Class III firearms

P.O.R.

PC12

Muzzle Loaders

P.O.R.

PC13

Rust (surface, inside/out, pitted, etc)

P.O.R.

PC14

Scopes (Outside only) Add (minimum)

$5.50

 

SHOTGUN WORK (LABOR ONLY, BLUING EXTRA)

SG01

Install bead, same hole (middle extra)

$22.00

SG02

Install bead, drill & tap (middle extra)

$33.00

SG03

Left Hand Safety (modification to original part)

$33.00

SG04

Poly-Choke (minimum)

$33.00

SG05

Cut and crown barrel

$38.50

SG06

Cut and crown double barrel

$55.00

SG07

Raise dents in barrel (minimum)

$38.50

SG08

Polish bore/chamber (per barrel)

$38.50

SG09

Long forcing cone (chrome add $30)

$44.00

SG10

Re soldier for-end lug

$55.00

SG11

Clean or chase threads for choke

$16.50

SG12

Replace, modify hinge pin

$55.00

SG13

Install Plug

$11.00

SG14

Install rib on barrel (sight extra)

$60.50

SG15

Install magazine tube extension

$11.00

 

STOCK WORK (LABOR ONLY)

ST01

Recoil pad (installation)

$38.50

ST02

Recoil pad, Monte Carlo

$49.50

ST03

Recoil pad, extra length

$60.50

ST04

Cut Stock (add) (minimum) (or straighten)

$22.00

ST05

Install swivels

$16.50

ST06

Install shock reducer

$38.50

ST07

Install Folding Stock

$27.50

ST08

Replace fore-end

$11.00

ST09

Checkering

P.O.R.

ST10

Customizing

P.O.R.

 

PISTOLSMITHING (LABOR ONLY, BLUING EXTRA)

PS01

Polish barrel feed throat, feed ramp

$38.50

PS02

Barrel bushing (match) installed

$27.50

PS03

Lower ejection port

$33.00

PS04

Flare ejection port

$16.50

PS05

Install extended ejector

$33.00

PS06

Polish and adjust extractor

$16.50

PS07

Extended magazine release, installed

$27.50

PS08

Funnel, magazine well, installed

$44.00

PS09

Magazine bumper pad, installed (each)

$12.00

PS10

Mainspring housing flattened

$13.00

PS11

2-piece guide rod, with reverse plug (installation)

$38.50

PS12

Recoil spring adjusted to ammo, test fire (ammo/target not included)

$27.50

PS13

Safety, extended thumb, installed

$27.50

PS14

Safety, ambidextrous thumb, installed

$44.00

PS15

Safety, standard thumb, installed

$16.50

PS16

Safety, standard grip, installed

$16.50

PS17

Safety, beavertail grip, installed

$66-82.50

PS18

Recrown barrel auto/revolver

$22.00

PS19

Squeeze slide, lap to receiver

$82.50

PS20

Peen rails, lap to slide

$82.50

PS21

Slide stop, extended/standard, installed

$11.00

PS22

Trigger guard, squared

$55.00

PS23

Trigger, long, adjustable

$27.50

PS24

Bob/Dehorn-Hammer, auto/revolver

$27.50

PS25

Polish & round auto/revolver trigger

$27.50

PS26

Install hammer

$27.50

PS27

Install Ed Brown flared maxi-well (silver soldier)

$121.00

PS28

Install other magazine funnels (no cutting of receiver)

$44.00

PS29

Cut detent in slide stop/thumb safety

$11.00

PS30

Fit thumb guard (no modification)

$16.50

PS31

Install standard barrel

$27.50

PS32

Install drop in Barsto (or equal barrel)

$55.00

PS33

Install NM barrel (fitting required)

$110.00

PS34

Install ramped barrel, includes machining receiver

$165.00

PS35

Install bushing compensator

$192.50

PS36

Install cone compensator

$220.00

PS37

Install Accu-Comp

$275.00

PS38

Install Full-Compensator

$330.00

PS39

Fit magazine (each) or modify for wad cutter

$11.00

PS40

Lighten slide (minimum)

$137.50

PS41

Fabricate receiver grip inserts and add Insta-Grip in place of grip

$110.00

PS42

Install trigger stop in trigger

$27.50

PS43

Install custom grips (minimum)

$27.50

PS44

Install slide cocker

$16.50

PS45

Install Para-Ord grip inserts

$55.00

PS46

Install revolver under lug

$60.50

PS47

Chamber cylinder

$38.50

PS48

Chamber Barrel revolver

$27.50

PS49

Install Crane Lock, revolvers

$38.50

PS50

Retime revolver

$55-82.50

PS51

Convert square butt to round butt, revolvers

$110.00

PS52

Correct push off/on revolver

$38.50

PS53

Install/Fit slide stop NM/Bulls eye

$27.50

PS54

Re-barrel revolver (minimum)

$82.50

PS55

Reset barrel, revolver

$82.50

PS56

Damascene Hammer/trigger each

$27.50

PS57

Re-chamber barrel, auto (minimum)

$60.50

PS58

Re-chamber, revolver (minimum)

$71.50

PS59

Correct cylinder end shake

$38.50

PS60

Install oversized cylinder stop

$27.50

PS61

Straighten crane

$27.50

PS62

Straighten ejector rod

$22.00

PS63

Straighten frame (minimum)

$55.00

PS64

Modify 1911 to accept Wadcutters (polish feed ramp, open barrel, radius firing pin stop, change recoil spring)

$71.50

PS65

Lighten receiver

$71.50

PS66

Cut receiver to commander length (funnel)

$33.00

PS67

Convert standard receiver to officer’s model (minimum)

$82.50

PS68

Install Sig Shorty trigger

$16.50

PS69

Remove fired case from chamber/cylinder

$16.50

PS70

Remove live round from chamber/cylinder

$33.00

PS71

Install Guncraft magwell (silver soldier)

$143.00

 

SINGLE ACTION REVOLVER

SA01

Install firing pin

$16.50

SA02

Install bolt (cylinder stop)

$33.00

SA03

Fabricate trigger/sear spring

$16.50

SA04

Install hand

$44.00

SA05

Adjust hand spring

$16.50

SA06

Lighten Mainspring

$27.50

 

RIFLESMITHING (LABOR ONLY, BLUING EXTRA)

RS01

Glass bed M1 Garand (includes handguard)

$137.50

RS02

Glass bed M14/M1A

$110.00

RS03

Trigger Job 4 ½-5 lbs M1/M1A/M14

$55.00

RS04

Modify gas system M14/M1A

$33.00

RS05

Set barrel back one turn & correct headspace

$110.00

RS06

Cut and crown barrel (most models)

$55.00

RS07

Free float barrel

$33.00

RS08

Alter bolt for scope (handle)

$66.00

RS09

Alter trigger guard (thin)

$55.00

RS10

ADL to BDL (conversion)

$82.50

RS11

Recrown barrel (minimum)

$11.00

RS12

Drill and tap for scope mount (top)

$44.00

RS13

Drill and tap for receiver sights

$44.00

RS14

Silver solder front sight ramp

$66.00

RS15

Install swivels standard

$16.50

RS16

Install Swivels Pachmyar or Similar

$33.00

RS17

Re-barrel (inletting & extractor cuts extra)

$110-187.00

RS18

Re-barrel, military rifle with standard barrel

pre-threaded and chambered

$66.00

RS19

Remove fired case from chamber

$16.50

RS20

Remove live round from chamber

$33.00

RS21

Lap bolt lugs

$44.00

RS22

Install muzzle break (barrel not threaded) min

$71.50

RS23

Install NM sights M1/M1A/M14 (lapped in)

$55.00

RS24

Single lug welded to rear of receiver (M1A/M12)

$82.50

RS25

Double lug welded front and rear, screwed w/Escutcheons

In stock, modify op.rod.

$165.00

RS26

Assemble kit gun AR-15, M6, etc (minimum)

$82.50

RS27

Refit muzzle loader, hammer

$33.00

RS28

Modify flash suppressor (open diameter M1A/M14)

$27.50

RS29

Modify Guide rod (round steel)

$27.50

RS30

Modify Op Rod for double lug

$33.00

RS31

Route Hand-guard for Heavy Barrel

$27.50

RS32

Cut Barrel to 18 inches and re-thread (minimum)

$71.50

RS33

Install match hand-guard AR15/M16

$27.50

RS34

Install QD Stud on match hand-guard

$16.50

RS35

Install Rhino Gas System (AR15)

$38.50

RS36

Modify AR-15 upper receiver for scope mount

(Remove carry handle)

$137.50

RS37

Install Escutcheons

$82.50

RS38

Install heavy barrel (M1 Garand)

$121.00

RS39

Fit new oversized wood stock (minimum)

$110.00

RS40

Install oversized recoil lug

$27.50

 

CHECKERING (PRICES DO NOT INCLUDE BLUING)

CO01

1911 Mainspring housing 20 LPI

$44.00

CO02

1911 grip safety bottom 20 LPI

$27.50

CO03

1911 MS Housing/GS and back of receiver 20 LPI

$132.00

CO04

1911 Trigger guard front or bottom 20 LPI

$55.00

CO05

1911 Front Strap 20 LPI

$165.00

CO06

Rear of slide 40 LPI

$55.00

CO07

Magazine release button 30 LPI

$27.50

CO08

Slide Stop 30 LPI

$27.50

CO09

Top of slide flattened/checkered 40 LPI

$135.00

CO10

Serrate front sight 30 LPI

$11.00

CO11

Serrate rear sight 30 LPI

$22.00

CO12

Serrate rear of slide (or front)

$33.00

CO13

Stipple front strap

$66.00

CO14

Checker high capacity front strap 20 LPI

$220.00

CO15

Top of slide flattened

$33.00

CO16

Top of slide flattened/serrated

$82.50

CO17

Serrate front sides of slide

$60.50

CO18

Serrate back-strap, revolver 30 LPI

$60.50

CO19

Checker back-strap, revolver 20 LPI

$82.50

 

SIGHTWORK (PRICES DO NOT INCLUDE BLUING)

SW01

Front, colored insert, serrated

$27.50

SW02

Front, Stake on

$22.00

SW03

Front silver soldier

$60.50

SW04

Front, dovetail

$44.00

SW05

Install fixed sights (set)

$33.00

SW06

Low mount Millet-stake on front (set)

$126.50

SW07

Low mount Millet-dual crimp front (set)

$159.50

SW08

Millet-Berretta 92 (Accurizer Combo)

$66.00

SW09

Millet-1911 series auto-stake on front (set)

$44.00

SW10

Millet-1911 series auto-dual crimp Front (set)

$77.00

SW11

Bo-mar high mount (set)

$44.00

SW12

Bo-mar low mount (set)

$121.00

SW13

Bo-mar Low Mount (with wings) (set)

$165.00

SW14

Bo-mar rib on autos

$82.50

SW15

Wichita low mount (set)

$126.50

SW16

Novac carry (set)

$16.50

SW17

Novac front dovetail

$44.00

SW18

Novac low mount (set)

$126.50

SW19

Install white outline blade on rear site

$11-33.00

SW20

Install heavy rib sight on most revolvers

$66.00

SW21

Install adjustable rear sight on most revolvers

$137.50

SW22

Tritium sights same as above

P.O.R.

SW23

Bore-sight only (mechanical zero)

$11.00

SW24

Install Weaver Type scope mount (drill/tap/fit)

$82.50

SW25

Install receiver scope mounts (pistols/revolver

Holes not drilled/tapped)

$82.50

SW26

Mount and bore-sight scope – hole drilled/tapped

Rifle/shotgun/pistol/revolver

$22.00

SW27

Millet dual crimp front sight

$38.50

  

TRIGGER WORK

TW01

STANDARD AUTO – 4-4 ½ lbs (inspect, fit, polish

All trigger parts, including bottom of firing pin stop and

Disconnector slot under slide).  Specify crisp or roll.

Some creep may exist in series 80 & double action pistols

$60.50

TW02

DELUXE AUTO – 3-3 ¾ lbs same as TW01

Add installation of an adjustable trigger

$82.50

TW03

ULTIMATE AUTO – 2-2 ½ lbs same as TW02

Add installation of a match hammer & sear, Wolfe reduction

spring kit

$104.50

TW04

.22 RUGER AUTO – Light & smooth

$82.50

TW05

.22 S&W M41 – Light & smooth

$71.50

TW06

STANDARD REVOLVER – All DA except Colt

Inspect, Fit, Polish all internal parts

COLT: ADD $16.50

$55.00

TW07

DELUXE REVOLVER – Same as TW06

Plus lighten SA & DA Pull

COLT: ADD $16.50

$71.50

TW08

ULTIMATE REVOLVER – Same as TW07

Plus install spring kit, trigger stop screw

COLT: ADD $16.50

$104.50

 

*DO NOT ADJUST OVER TRAVEL SCREW OR RELEASE THE SLIDE WITHOUT HOLDING THE TRIGGER TO THE REAR.  THESE TRIGGER JOBS ARE VERY DELICATE.

TW09

COLT PYTHON – Add $44.00 to TW06, 7 & 8

$99-148.50

TW10

SAA REVOLVERS – Original or Replica, inspect, polish

All internal parts, adjust hand spring, lighten mainspring

Fabricate trigger/sear spring, lighten/smoothen trigger pull

$82.50

TW11

BOLT GUN – Polish internal parts and set trigger for

Light/smooth pull

$55.00

TW12

BOLT GUN ULTIMATE – same as TW11

Plus lighten to a crisp clean surprise!

(some parts, replacement may be required)

$82.50

TW13

SEMI-AUTO RIFLE or SHOTGUN – Smoothen internal parts

Lighten pull (P.O.R.)

(some parts, replacement may be required)

$60.50

 

 

FFM SPECIAL PACKAGES (LABOR ONLY)

           

1001 COMBAT 1911 PACKAGE

$302.50

 

PS23 – Install Adjustable Trigger

$27.50

 

PS01 – Polish Barrel, Feed Throat, Feed Ramp

$38.50

 

PS03 – Lower Ejection Port

$33.00

 

PS04 – Flare Ejection Port

$16.50

 

PS06 – Polish and Adjust Extractor

$16.50

 

SC06 – Test Fire

$16.50

 

PS17 – Ed Brown Beaver Tail

$82.50

 

TW01 – Trigger Job 4-4 ½ lbs

$60.50

 

PS14 – Ambidextrous-Safety Ed Brown

$44.00

           

1002 COMBAT “DELUXE” 1911 PACKAGE

$495.00

 

1001 – Same as Combat Package plus below

$302.50

 

TW03 – Trigger Job 3-3 ¾ lbs (standard #75)

$22.00

 

PS11 – 2-piece Guide Rod, Reverse Plug

$38.50

 

PS05 – Extended Ejector

$33.00

 

SW18 – Low Mount NOVAC Sights (or MMC)

$121.00

           

1003 COMBAT “ULTIMATE” 1911 PACKAGE

$1017.50

 

1002 – Same as Deluxe Package plus below

$495.00

 

TW03 – Trigger Job 2-2 ¾ lbs (standard #95)

$104.50

 

PS32 – Drop in Bar-Sto Barrel

$55.00

 

PS28 – S&A Magazine Well

$44.00

 

CO11 – Serrate Rear of Sight

$33.00

 

CO12 – Serrate Rear of Slide

$33.00

 

CO05 – Checker Front Strap (SS add $27.50)

$165.00

 

CO04 – Checker Trigger Guard

$55.00

 

PS19 – Squeeze Slide

$82.50

 

PS20 – Peen Rails of Receiver

$82.50

 

2001 BULLSEYE 1911 PACKAGE

$495.00

 

PS19 – Squeeze Slide

$82.50

 

PS20 – Peen Rails of Receiver

$82.50

 

PS23 – Install Adjustable Trigger

$27.50

 

TW01 – Trigger Job 4-4 ½ lbs

$60.50

 

PS06 – Polish and Adjust Extractor

$16.50

 

PS05 – Extended Ejector

$33.00

 

PS33 – Install National Match Barrel

$110.00

 

SW11 – High Mount Bo-mar Sight

$44.00

 

PS01 – Polish Barrel, Feed Throat, Feed Ramp

$38.50

 

PS53 – Fit Slide Stop

$27.50

 

PS13 – Fit Firing Pin Stop

$11.00

 

PS74 – Install Spring Kit

$27.50

                                                                                                                                               

2002 BULLSEYE “RED EYE” 1911 PACKAGE

$550.00

 

2001 – Same as the Bullseye package plus below

$495.00

 

SW24 – Weaver Style Mount

$82.00

 

SW26 – Mount Red Dot Scope

$22.00

 

SW11 – Delete Hi-Mount Bo-mar Sights

-$44.00

 

2003 BULLSEYE RIB 1911 PACKAGE

$550.00

 

2001 – Same as the Bulls-eye package plus below

$495.00

 

SW14 – Bo-mar Rib

$22.50

 

SW24 – Delete Weaver Style Mount

-$82.00

 

SW26 – Delete Mount Red Dot Scope

-$22.00

 

3001 TACTICAL IPSC 1911 PACKAGE

$1402.50

 

1003 – Same as 1003 Plus Below

$1083.50

 

PS36 – 3 Port Cone Comp

$220.00

 

SW12 – Replace Novac with Lo-Mount Bo-Mar

$0.00

 

PS40 – Lighten Slide

$137.50

 

3002 LIMITED IPSC 1911 PACKAGE

$1501.50

 

3001 – Same as Tactical IPSC Package plus below

$1402.50

 

SW25 – Install Receiver Scope Mount

$82.50

 

SW26 – Install Red Dot Scope

Lo-Mount Bo-Mar Cut Will Remain for slide cocker

or can be used as Tactical IPSC

$22.00

                         

4001 PPC REVOLVER PACKAGE

            $412.50

 

PS54 – Install Heavy Barrel

$82.50

 

PS46 – Install under Lug

$60.50

 

SW20 – Install Sight Rib

$66.00

 

PS24 – De-Horn Hammer

$27.50

 

PS42 – Install Trigger Screw

$27.50

 

PS50 – Check and Adjust Timing

$82.50

 

TW08 – Trigger Job 6-8 lbs Double Action

$104.50

 

PS47 – Chamfer Cylinder

$38.50

 

PS48 – Chamfer Barrel

$27.50

 

PS25 – Polish Trigger Smooth

$27.50

 

PS18 – Re-crown Barrel

$22.00

 

4002 PPC “REDEYE” REVOLVER PACKAGE

$432.50

 

4001 – Same as PPC Package plus below

$412.50

 

SW26 – Install Red Dot Scope Mount

22.00

 

5001 NATIONAL MATCH M1 GARAND USMC STYLE

$401.50

 

RS01 – Glass Bed Stock & Hand-guards

$137.50

 

RS17 – Install Heavy Barrel

$110.00

 

RS23 – Install NM Sights

$55.00

 

RS04 – Tighten Gas Cylinder

$33.00

 

RS28 – Trigger Job

$38.50

 

TW13 – Clear Barrel Channel of Stock and Refinish Wood Stock

$33.00

+$110.00

 

RS31 – Route Hand-guard

$27.50

 

5002 NATIONAL MATCH M14/M1A USMC STYLE

$401.50

 

RS01 – Glass Bed Stock and Hand-guard

$110.00

 

RS17 – Install Light/Heavy Barrel

$110.00

 

RS23 – Install NM Rear Sight

$55.00

 

RS04 – Modify Gas System

$33.00

 

RS28 – Modify Flash Suppressor

$27.50

 

TW13 – Trigger Job 4 ½ lbs

$60.50

 

RS39 – Fit new Oversized Wood Stock

+$110.00

 

RS24 – Single Lug

+$82.50

 

RS25 – Double Lug (Includes Bolts, Escutcheons, Modify OP ROD)

+$165.00

 

RS29 – Modify Guide Rob

$27.50

 

RS31 – Route Hand-guard

$27.50

 

 

5003 REMINGTON 700 SUPER TARGET RIFLE

$825.00

 

RS17 – Glass Bed Stock

$110.00

 

RS07 – Free Float Barrel

$33.00

 

RS17 – Install Heavy Barrel

$187.00

 

RS21 – Lap Bolt Lugs

$44.00

 

TW12 – Trigger Jobs

$82.50

 

RS39 – Fit New Stock

$110.00

 

ST03 – Fit Recoil Pad

$60.50

 

RS37 – Install Escutcheon

$82.50

 

SW26 – Mount Bore-sight Scope

$22.00

 

RS10 – Install Winchester MODEL 70 BDL Floorplate (USMC M40A1 STYLE)

$82.50

 

RS40 – Install Oversized Recoil Lug

$27.50

 

RS16 – Install Swivels

$33.00

Shopping Cart

The cart is empty

Fortress Firearms Manufacturing, LLC 
P.O. Box 888, Petersburg, WV 26847
681-892-0123

Gunsmithing:
Tom - 
tekivlehan@ffm-llc.com

Sales/administration:
sales@ffm-llc.com

Catalog requests, lead time estimates, warranty information, shipping polices, etc. - 
info@ffm-llc.com